1000 LSE Regupol Anti-slip mat

Suitable for:   

ROAD   |   SEA   |   AIR  |   RAIL
TRANSPORTATION

Made from rubber fibres, Regupol 1000 LSE is ideal for sharp edged cargo, heavy goods and all palletised loads. Cargo remains secure during hazardous events such as emergency braking, travelling over bumpy surfaces or taking evasive action. 

Available in 8mm or 12mm thicknesses, these mats are highly porous and are capable of absorbing moisture and residue from the floor which prevents any notable loss in sliding friction co-efficient. This is where Regupol anti-slip mats outperform alternative products that have anti-slip films or materials with a smooth surface. 

Anti-slip mats reduce the total pre-stressing tension required to tie down the load and consequently, are essential for any professional transportation company. 

FEATURES:

• Can be rolled out easily and cut to size.

• Long lasting and able to withstand repeated use.

• Available in thicknesses of 8mm or 12mm.

• Made from recycled SBR rubber (car tyres) which means it exceeds the 0.60 co-efficient of friction.

• Quick and easy to install.

• Reduces the total tension force required when lashing down loads.

• Particularly beneficial for loads that cannot withstand a high traction force.

• Creates a unified unit with the loading surface.

• Maximum loading: 630 t/m2 = 6.30 N/mm2 when 8mm thick.

• Can more than halve the number of lashings required - saving money, time and materials.

• Highly porous / absorbent.

• Excellent anti-slip mats ensure at least 60% of load securing (however tie-downs and similar fixings should not be forgotten).

• Delivery forms: rolls, sheets, cuttings on request

• Resistant to - UV light, sodium chloride, weak acids and alkaline solutions (swells up when exposed to hydrocarbons such as oil, fuel etc).

• Made in Germany from recycled material.

• Suitable for: panels, pallets, machine parts, containers, paper coils, steel, glass, rod coils etc.

PLEASE NOTE: The sliding friction coefficient of a friction-increasing surface depends on the combination of materials involved, the temperature, the condition of the material surfaces and the anti-slip mat (soiling, moisture, etc.). The contact surfaces of load and floor must be swept clean, grease-free and dry to achieve optimum anti-slip properties.